News Archive for CMP Products

Do all Barrier Glands provide the same function?

In theory the principal of a barrier gland is the same for all comparable products, in that the equipment form of protection is common (e.g. Ex d IIC), given that the certification standards used are identical.
Read more…

Leading Provider of PX2K Cable Gland in Oceania

Are you looking for a provider of PX2K Cable Gland in Oceania? CMP Products are a leading provider of PX2K Cable Gland in Oceania.

CMP Type PX2K Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath.

All CMP Cable Connectors are EMC Tested.

The cable gland provides mechanical cable retention and electrical continuity via armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

The CMP PX2K cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.

For further information on CMP Products, please visit their website.

Leading Provider of PX2K Cable Gland in the Middle East

Are you looking for a provider of PX2K Cable Gland in the Middle East? CMP Products are a leading provider of PX2K Cable Gland in the Middle East and throughout the world.

CMP Type PX2K Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath.

All CMP Cable Connectors are EMC Tested.

The cable gland provides mechanical cable retention and electrical continuity via armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

The CMP PX2K cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.

For further information on CMP Products, please visit their website.

Leading Provider of PX2K Cable Gland in Europe

Are you looking for a provider of PX2K Cable Gland in Europe? CMP Products are a leading provider of PX2K Cable Gland in Europe and throughout the world.

CMP Type PX2K Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath.

All CMP Cable Connectors are EMC Tested.

The cable gland provides mechanical cable retention and electrical continuity via armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

The CMP PX2K cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.

For further information on CMP Products, please visit their website.

Leading Provider of PX2K Cable Gland in Asia

Are you looking for a provider of PX2K Cable Gland in Asia? CMP Products are a leading provider of PX2K Cable Gland in Asia  and throughout the world.

CMP Type PX2K Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath.

All CMP Cable Connectors are EMC Tested.

The cable gland provides mechanical cable retention and electrical continuity via armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

The CMP PX2K cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.

For further information on CMP Products, please visit their website.

Leading Provider of PX2K Cable Gland in South America

Are you looking for a provider of PX2K Cable Gland in South America? CMP Products are a leading provider of PX2K Cable Gland in South America and throughout the world.

CMP Type PX2K Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath.

All CMP Cable Connectors are EMC Tested.

The cable gland provides mechanical cable retention and electrical continuity via armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

The CMP PX2K cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.

For further information on CMP Products, please visit their website.

Leading Provider of PX2K Cable Gland in North America

Are you looking for a provider of PX2K Cable Gland in North America? CMP Products are a leading provider of PX2K Cable Gland in North America and throughout the world.CMP Type PX2K Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath.

All CMP Cable Connectors are EMC Tested.

The cable gland provides mechanical cable retention and electrical continuity via armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

The CMP PX2K cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.

For further information on CMP Products, please visit their website.

Leading Provider of PX2K Cable Gland in Africa

Are you looking for a provider of PX2K Cable Gland in Africa? CMP Products are a leading provider of PX2K Cable Gland in Africa and throughout the world.

CMP Type PX2K Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath.

All CMP Cable Connectors are EMC Tested.

The cable gland provides mechanical cable retention and electrical continuity via armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

The CMP PX2K cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.

For further information on CMP Products, please visit their website.

Leading Provider of E1FW Cable Gland in Oceania

Are you looking for a provider of E1FW Cable Gland in Oceania? CMP Products are a leading provider of E1FW Cable Gland in Oceania and throughout the world.

CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.

All CMP Cable Glands are EMC Tested.

This cable gland provides a Flameproof seal on the cable inner bedding and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination. Separate tightening actions for the inner displacement seal and the armour termination afford maximum control over the pressure applied to the cable bedding, and also allows the effectiveness of the gas tight seal to be tested. A detachable armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath.

The CMP E1FW Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.

For further information on CMP Products, please visit their website.

Leading Provider of E1FW Cable Gland in the Middle East

Are you looking for a provider of E1FW Cable Gland in the Middle East? CMP Products are a leading provider of E1FW Cable Gland in the Middle East and throughout the world.

CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.

All CMP Cable Glands are EMC Tested.

This cable gland provides a Flameproof seal on the cable inner bedding and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination. Separate tightening actions for the inner displacement seal and the armour termination afford maximum control over the pressure applied to the cable bedding, and also allows the effectiveness of the gas tight seal to be tested. A detachable armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath.

The CMP E1FW Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
For further information on CMP Products, please visit their website.

Leading Provider of E1FW Cable Gland in Europe

Are you looking for a provider of E1FW Cable Gland in Europe ? CMP Products are a leading provider of E1FW Cable Gland in Europe and throughout the world.

CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.

All CMP Cable Glands are EMC Tested.

This cable gland provides a Flameproof seal on the cable inner bedding and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination. Separate tightening actions for the inner displacement seal and the armour termination afford maximum control over the pressure applied to the cable bedding, and also allows the effectiveness of the gas tight seal to be tested. A detachable armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath.

The CMP E1FW Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
For further information on CMP Products, please visit their website.

Leading Provider of E1FW Cable Gland in Asia

Are you looking for a provider of E1FW Cable Gland in Asia? CMP Products are a leading provider of E1FW Cable Gland in Asia and throughout the world.

CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.

All CMP Cable Glands are EMC Tested.

This cable gland provides a Flameproof seal on the cable inner bedding and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination. Separate tightening actions for the inner displacement seal and the armour termination afford maximum control over the pressure applied to the cable bedding, and also allows the effectiveness of the gas tight seal to be tested. A detachable armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath.

The CMP E1FW Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
For further information on CMP Products, please visit their website.

Leading Provider of E1FW Cable Gland in South America

Are you looking for a provider of E1FW Cable Gland in South America? CMP Products are a leading provider of E1FW Cable Gland in South America and throughout the world.

CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.

All CMP Cable Glands are EMC Tested.

This cable gland provides a Flameproof seal on the cable inner bedding and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination. Separate tightening actions for the inner displacement seal and the armour termination afford maximum control over the pressure applied to the cable bedding, and also allows the effectiveness of the gas tight seal to be tested. A detachable armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath.

The CMP E1FW Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
For further information on CMP Products, please visit their website.

Leading Provider of E1FW Cable Gland in North America

Are you looking for a provider of E1FW Cable Gland in North America? CMP Products are a leading provider of E1FW Cable Gland in North America  and throughout the world.

CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.

All CMP Cable Glands are EMC Tested.

This cable gland provides a Flameproof seal on the cable inner bedding and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination. Separate tightening actions for the inner displacement seal and the armour termination afford maximum control over the pressure applied to the cable bedding, and also allows the effectiveness of the gas tight seal to be tested. A detachable armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath.

The CMP E1FW Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
For further information on CMP Products, please visit their website.

Leading Provider of E1FW Cable Gland in Africa

Are you looking for a provider of E1FW Cable Gland in Africa? CMP Products are a leading provider of E1FW Cable Gland in Africa and throughout the world.

CMP Type E1FW Tri-Star Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable.

All CMP Cable Glands are EMC Tested.

This cable gland provides a Flameproof seal on the cable inner bedding and in addition the gas tight seal has been tested to prove compatibility with Restricted Breathing equipment. The cable gland allows mechanical cable retention and earth continuity via the cable armour termination. Separate tightening actions for the inner displacement seal and the armour termination afford maximum control over the pressure applied to the cable bedding, and also allows the effectiveness of the gas tight seal to be tested. A detachable armour cone and AnyWay clamping ring arrangement facilitates remote make off and enables the cable to be disconnected from the equipment. An environmental / load retention seal is provided on the cable outer sheath.

The CMP E1FW Tri-Star Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
For further information on CMP Products, please visit their website.

Leading Provider of 737 Adaptors & Reducers in Oceania

Are you looking for a provider of 737 Adaptors & Reducers in Oceania? CMP Products are a leading provider of 737 Adaptors & Reducers in Oceania and throughout the world.

The CMP Type 737 range of Thread Conversion Adaptors & Reducers is designed to provide flexibility and versatility in the execution of construction works when there is a conflict between the type or size of the cable gland thread and the cable entry hole in the equipment. These Thread Conversion Adaptors & Reducers are available with Male to Female connection threads and can be supplied with thread conversion between the forward and rear threads to either an increased or reduced size or a different thread type, e.g. Metric to NPT, or NPT or Metric. Please refer to the Product Selection Table For 737 Adaptors and Reducers listed as a PDF below.CMP 737 Thread Conversion Adaptors & Reducers are available in Brass, Aluminium Stainless Steel or Nylon and can be supplied for both Industrial and Hazardous Area applications, with Ex “d” & Ex “e” Component Approval (Nylon Version is Ex e only).

The CMP 737 Adaptor & Reducer range is also optionally available with an integral “O” Ring seal when the male thread is parallel.

For further information on CMP Products, please visit their website.

Leading Provider of 737 Adaptors & Reducers in the Middle East

Are you looking for a provider of 737 Adaptors & Reducers in the Middle East? CMP Products are a leading provider of 737 Adaptors & Reducers in the Middle East and throughout the world.

The CMP Type 737 range of Thread Conversion Adaptors & Reducers is designed to provide flexibility and versatility in the execution of construction works when there is a conflict between the type or size of the cable gland thread and the cable entry hole in the equipment. These Thread Conversion Adaptors & Reducers are available with Male to Female connection threads and can be supplied with thread conversion between the forward and rear threads to either an increased or reduced size or a different thread type, e.g. Metric to NPT, or NPT or Metric. Please refer to the Product Selection Table For 737 Adaptors and Reducers listed as a PDF below.CMP 737 Thread Conversion Adaptors & Reducers are available in Brass, Aluminium Stainless Steel or Nylon and can be supplied for both Industrial and Hazardous Area applications, with Ex “d” & Ex “e” Component Approval (Nylon Version is Ex e only).

The CMP 737 Adaptor & Reducer range is also optionally available with an integral “O” Ring seal when the male thread is parallel.

For further information on CMP Products, please visit their website.

Leading Provider of 737 Adaptors & Reducers in Europe

Are you looking for a provider of 737 Adaptors & Reducers in Europe? CMP Products are a leading provider of 737 Adaptors & Reducers in Europe and throughout the world.

The CMP Type 737 range of Thread Conversion Adaptors & Reducers is designed to provide flexibility and versatility in the execution of construction works when there is a conflict between the type or size of the cable gland thread and the cable entry hole in the equipment. These Thread Conversion Adaptors & Reducers are available with Male to Female connection threads and can be supplied with thread conversion between the forward and rear threads to either an increased or reduced size or a different thread type, e.g. Metric to NPT, or NPT or Metric. Please refer to the Product Selection Table For 737 Adaptors and Reducers listed as a PDF below.CMP 737 Thread Conversion Adaptors & Reducers are available in Brass, Aluminium Stainless Steel or Nylon and can be supplied for both Industrial and Hazardous Area applications, with Ex “d” & Ex “e” Component Approval (Nylon Version is Ex e only).

The CMP 737 Adaptor & Reducer range is also optionally available with an integral “O” Ring seal when the male thread is parallel.

For further information on CMP Products, please visit their website.

Leading Provider of 737 Adaptors & Reducers in Asia

Are you looking for a provider of 737 Adaptors & Reducers in Asia? CMP Products are a leading provider of 737 Adaptors & Reducers in Asia and throughout the world.

The CMP Type 737 range of Thread Conversion Adaptors & Reducers is designed to provide flexibility and versatility in the execution of construction works when there is a conflict between the type or size of the cable gland thread and the cable entry hole in the equipment. These Thread Conversion Adaptors & Reducers are available with Male to Female connection threads and can be supplied with thread conversion between the forward and rear threads to either an increased or reduced size or a different thread type, e.g. Metric to NPT, or NPT or Metric. Please refer to the Product Selection Table For 737 Adaptors and Reducers listed as a PDF below.CMP 737 Thread Conversion Adaptors & Reducers are available in Brass, Aluminium Stainless Steel or Nylon and can be supplied for both Industrial and Hazardous Area applications, with Ex “d” & Ex “e” Component Approval (Nylon Version is Ex e only).

The CMP 737 Adaptor & Reducer range is also optionally available with an integral “O” Ring seal when the male thread is parallel.

For further information on CMP Products, please visit their website.

Leading Provider of 737 Adaptors & Reducers in South America

Are you looking for a provider of 737 Adaptors & Reducers in South America? CMP Products are a leading provider of 737 Adaptors & Reducers in South America and throughout the world.

The CMP Type 737 range of Thread Conversion Adaptors & Reducers is designed to provide flexibility and versatility in the execution of construction works when there is a conflict between the type or size of the cable gland thread and the cable entry hole in the equipment. These Thread Conversion Adaptors & Reducers are available with Male to Female connection threads and can be supplied with thread conversion between the forward and rear threads to either an increased or reduced size or a different thread type, e.g. Metric to NPT, or NPT or Metric. Please refer to the Product Selection Table For 737 Adaptors and Reducers listed as a PDF below.CMP 737 Thread Conversion Adaptors & Reducers are available in Brass, Aluminium Stainless Steel or Nylon and can be supplied for both Industrial and Hazardous Area applications, with Ex “d” & Ex “e” Component Approval (Nylon Version is Ex e only).

The CMP 737 Adaptor & Reducer range is also optionally available with an integral “O” Ring seal when the male thread is parallel.

For further information on CMP Products, please visit their website.

Member Profiles

Featured Profile

Featured Profile

Featured Videos

Featured Case Studies